New Find the right air starter for your engine in seconds Find your starter by engine Try our new Air Starter Model Finder: 1,800+ engines, 100+ makes, plus competitor-to-Ingersoll Rand crossovers. Try the Finder

ST400IC03LXX-GEN Turbine Air Starter by Ingersoll Rand

Genuine Ingersoll Rand, made in the USA

Manufacturer: Ingersoll Rand

Guaranteed 100% Authentic

Made in the USA

Condition: New

*Rebuilt Models Have the letter "R" at the end of their model number

SKU:
ST400IC03LXX-GEN
Price: $2,952.83

Sold Out

Get our best pricing: add it to your quote

View your quote list and send the request

Our Phone #: 1-800-353-4676

Our Email: [email protected]

Description

The Ingersoll Rand ST400IC03LXX-GEN is a genuine IR ST400-series turbine air starter for 90 to 150 psi air supplies. It delivers up to 25 hp and 150 ft-lb of breakaway torque at 150 psi. It mounts on an SAE No. 3 flange, turns left-hand through a pinion specified when the order is placed, and takes air through a 1 in. NPT threaded inlet. Its turbine motor needs no lubrication. Ingersoll Rand's ST400 series covers diesel engines from 5 to 60 liters in power generation, marine, rail and transportation service.

Ingersoll Rand ST400IC03LXX-GEN ST400 series turbine air starter, left-hand rotation, SAE 3 flange

 

ST400IC03LXX-GEN Specifications

Ingersoll Rand ST400IC03LXX-GEN technical data
Manufacturer / seriesIngersoll Rand ST400 series (ST400)
Motor typeRadial turbine, 44% arc, lube-free
EngagementInertia, overhung pinion
Operating pressure90 to 150 psi (maximum 150 psi)
Maximum power25 hp (19 kW)
Breakaway torque150 ft-lb (203 N·m) at 150 psi
Air consumption750 scfm (354 L/s) at maximum power
Gear ratio"C" ratio; gears and bearings run in a sealed oil bath
MountingSAE No. 3 flange (code 03); the removable flange can be rotated 360°
PinionSpecified when ordering (XX): match your engine's ring gear
RotationLeft-hand (L)
Suffix-GEN (generic listing; we confirm the exact build with you)
Air inlet1 in. NPT threaded inlet (the I in the model number)
Engine size (ST400 series)Diesel engines from 5 to 60 L (300 to 3,600 cu. in.)
Weight38 lb (17.2 kg)
LubricationNone required for the turbine motor

 

Performance by Supply Pressure

Ingersoll Rand publishes these figures for the ST400:

Supply pressureBreakaway torqueSpeed at max powerMax powerFlow at max power
90 psi (6.2 bar)90 ft-lb (122 N·m)1,500 rpm14 hp (10 kW)430 scfm (203 L/s)
120 psi (8.3 bar)120 ft-lb (163 N·m)1,650 rpm19 hp (14 kW)600 scfm (284 L/s)
150 psi (10.3 bar)150 ft-lb (203 N·m)1,650 rpm25 hp (19 kW)750 scfm (354 L/s)

 

Confirming Fit

Match the full model number on your existing starter's nameplate, or send us the engine make, model and serial number. You can also use our Air Starter Model Finder.

 

How to Read the Model Number

CodeMeaning
ST400ST400 series, 44% arc turbine, 150 psi maximum
I1 in. NPT inlet (no letter = SAE split-flange inlet)
CGear ratio
03SAE No. 3 mounting flange (01 = SAE No. 1, 03 = SAE No. 3)
LLeft-hand rotation
XXPinion specified when ordering
-GENGeneric listing

 

Why Choose the ST400IC03LXX?

  • Lube-free turbine. No lubricator to fill and no oil mist in the exhaust.
     
  • One-hose hookup. A single air connection simplifies piping.
     
  • Compact and light. In-line design that is easy to install.
     
  • Flexible mounting. The removable flange rotates 360° for mounting flexibility.
     
  • Maintenance free. Sealed oil-bath lubrication for the gears and bearings.

 

ST400IC03LXX-GEN FAQ

Which ST400-series model do I need: ST400, ST455 or ST499?

They share the same housing and mounting. They differ in turbine arc, which sets the pressure they are built for: the ST400 (44% arc) for 90 to 150 psi, the ST455 (55% arc) up to 120 psi, and the ST499 (full arc) up to 90 psi. Never run a starter above the maximum pressure stamped on its nameplate.

 

Does the ST400 need lubrication?

No. The turbine motor needs no external lubrication, and the gears and bearings run in a sealed oil bath.

 

Can it crank for a long time?

Ingersoll Rand does not rate this starter for extended cranking (more than 10 seconds). For hard-starting engines or long crank cycles, choose a larger turbine such as the ST600.

 

What air supply and accessories does it need?

Provide a 90 to 150 psi supply, with enough receiver volume to deliver up to 750 scfm while the engine cranks. Ingersoll Rand's matching accessories include the ST900-267-24 1-1/2 in. strainer (300 mesh), SRV125 relay valve, 150BMP-1051B / 150BMP-2451B solenoid valves, SMB-618 push-button valve and the ST400-A339M manual control valve.

 

Buy from a Factory-Authorized Ingersoll Rand Distributor

Factory-authorized Ingersoll Rand air starter distributorAirStartersDirect.com is a factory-authorized Ingersoll Rand distributor operated by Zampini Industrial Group, which has supplied engine starting equipment since 1987. Every ST400IC03LXX-GEN we sell is new, genuine Ingersoll Rand equipment. We supply the complete ST400 series and the relay valves, strainers and control valves that go with it.

Need help confirming fit? Call 1-800-353-4676 with your engine make, model and serial number for a fast quote and free selection help.

Specifications source: Ingersoll Rand Engine Starting Systems catalog and Ingersoll Rand ST400 Series Air Starters.

Ingersoll Rand pneumatic air starters can replace any factory mounted starter engine and simultaneously offer a variety of helpful benefits. Compared to conventional electric starters, a pneumatic air starter occupies considerably less space as it is run by air. Pneumatic air starters are also considered safer in hazardous environments as they do not produce electrical sparks like electric starters sometimes do, thus eliminating the risk of igniting flammable materials that may be present.

Ingersoll Rand air starters have significantly more torque than electric starters of equivalent size, and that allows even a small air starter to start very large engines and turbines. In addition, electric starters as well as their wiring may become excessively hot in the event that it takes longer than expected to start the engine, while air-starters can be run for as long as their air supply lasts. Turbine starters provide even more torque and tend to be simpler, and therefore are a natural fit for turbine engines. Turbine air starters are utilized extensively on large turbofan engines commercial and military aircraft; as well as marine ships and vessels, trains, heavy construction equipment, and more.

ST400 Series Manuals and Parts Lists

All Ingersoll Rand manuals, parts lists and catalogs

View AllClose

Specifications

Series:
ST400
Model:
ST400
Starter Type:
Turbine
Engagement:
Pre-engaged
Pinion Rotation:
Left hand
Mounting Flange:
SAE 3
Max Power:
25 hp (19 kW) at 150 psi
Supply Pressure:
90-150 psi
Max Supply Pressure:
150 psi
Diesel Engines Up To:
60 L
Operating Medium:
Air only
Air Consumption:
750 scfm (354 L/s) at 150 psi
Air Inlet:
1 in NPT
View AllClose

Related Products

Related Products

Turbine Air Starter Category Links

Ingersoll Rand ST150 Series turbine air starter ST150 Series Newest turbine starter from Ingersoll Rand for engines from 16-95 liters! Ingersoll Rand ST1000 Series turbine air starter ST1000 Series Powerful 70 hp turbine motor offers best-in-class performance in the harshest conditions! For Diesel engines 16 - 320 liters. Ingersoll Rand B006 and T480 Series engine barring motors Engine Barring Motors For service work on diesel engines.

Questions? Need Help Finding The Right Air Starter? Use Our Fast Response Form Below

Click here to get an air starter quote fast

Or Call Us at 1-800-353-4676

Not sure which starter fits your engine?

Tell us the engine make and model and we’ll match the right Ingersoll Rand starter.

1-800-353-4676 Request a Quote Model Finder