Ingersoll Rand literature · Installation & maintenance manual
Ingersoll Rand Air Starters Models 150BMPD88R54-3335 and 150BMPD88L54-3336 Installation and Maintenance Information (Form P7134)
A four-page Ingersoll Rand installation and maintenance sheet for the 150BMP planetary-geared air starters 150BMPD88R54-3335 (right-hand) and 150BMPD88L54-3336 (left-hand). It contains an exploded view, the numbered parts list with starter drives for each rotation, accessories, the tune-up kit, lubrication guidance and reorientation information.
Document at a Glance
- Publisher
- Ingersoll Rand
- Document type
- Installation & maintenance manual
- Form / number
- Form P7134, No. 03540176, Edition 2, August 2009
- Language
- English
- Pages
- 4
- File
- PDF, 635 KB
What's in This Document
| Section | Pages | What it covers |
|---|---|---|
| Exploded view | 2 | Numbered drawing of the starter that matches the parts list items. |
| Parts list | 3 | Motor, planetary gear train, piston, starter drive and drive housing parts with accessories and the tune-up kit. |
| Lubrication | 3 | Lubricant by temperature and the recommended HDL2 lubricator. |
| Starter reorientation | 3 | Port sizes, rotation definitions and how many angular positions the motor and drive housings can take. |
| Parts, maintenance and related documentation | 3 | End-of-life recycling, authorized service, and the related product safety manual. |
Key Specifications and Data
| Item | Value | Page |
|---|---|---|
| Inlet | 1-1/4 in pipe tap | 3 |
| Exhaust | 1-1/4 in pipe tap | 3 |
| Lubricant above 32 F (0 C) | SAE 10 non-detergent motor oil | 3 |
| Lubricant below 32 F (0 C) | Diesel fuel | 3 |
| Recommended lubricator | Ingersoll Rand HDL2 (for air or gas driven starters) | 3 |
| Vane packet | Set of 5 vanes | 3 |
| Drive housing cap screws | 12 | 3 |
| Motor housing positions | 4 angular positions | 3 |
| Drive housing positions | 18 angular positions | 3 |
| Rotation | R.H. clockwise, L.H. counterclockwise, viewed from the marked end | 3 |
Models Covered
Model codes as printed in the document. Linked codes go to the matching Ingersoll Rand starter in our catalog.
150BMPD88R54-3335 150BMPD88L54-3336 D88R54 D88L54
Service Kits and Part Numbers
| Part number | Description | Page |
|---|---|---|
| 150BM-TK2 | Tune-up kit | 3 |
| 150BMP-A102A | Motor housing cover assembly (1-1/4 in) | 3 |
| ST400-81 | Bushing | 3 |
| VSM-962 | Nameplate (item 4A) | 3 |
| R3H-24 | Rear rotor bearing | 3 |
| 150BM-3 | Cylinder | 3 |
| 10BM-98 | Cylinder dowel | 3 |
| 10BM-42-5 | Vane packet (set of 5 vanes) | 3 |
| 10BMP-53 | Rotor | 3 |
| 10BM-40 | Motor housing | 3 |
| 101BMPD-17 | Rotor pinion | 3 |
| 101BMPD-37 | Gear case | 3 |
| 101BMPD-A10 | Planet gear assembly (3) | 3 |
| C6H20A-6 | Planet gear frame retaining ring | 3 |
| 101BMP-A378-2 | Gear case cover assembly | 3 |
| 150BMP-607 | Gear case cover seal | 3 |
| 150BMP-604 | Piston seal | 3 |
| 150BMP-703 | Piston assembly | 3 |
| 101BMP-705-1 | Shift ring (two halves) | 3 |
| 101BMP-700-1 | Piston return spring | 3 |
| 101BMP-299-1 | Starter drive for Model D88R54 | 3 |
| 101BMP-299-2 | Starter drive for Model D88L54 | 3 |
| 150BMP-300A-88-1 | Drive housing assembly | 3 |
| ML50K-318 | Drive housing bearing | 3 |
| K4U-A267AT | Air strainer assembly | 3 |
| 150BM-A735 | Road splash deflector assembly | 3 |
| 150BM-A674 | Muffler assembly | 3 |
| HDL2 | Lubricator | 3 |
Confirm part numbers against the serial and model plate of your starter. For any part not listed in our catalog, send us the number.
Frequently Asked Questions
What is the difference between 150BMPD88R54-3335 and 150BMPD88L54-3336?
Rotation: the R54-3335 is right-hand (clockwise) and the L54-3336 is left-hand, each with its own starter drive, 101BMP-299-1 or 101BMP-299-2.
What tune-up kit fits the 150BMPD88R54-3335 and 150BMPD88L54-3336?
Tune-up kit 150BM-TK2, which covers items 8, 9, 10, 14, 19, 22, 32, 33, 36A and 46.
What size are the inlet and exhaust on these starters?
Both are 1-1/4 in pipe taps.
What oil should be used in the 150BMPD88 starter?
SAE 10 non-detergent motor oil above 32 F (0 C) and diesel fuel below it; an HDL2 lubricator is recommended.
Need the parts or the starter in this document? Send the model number from your starter's plate and we will confirm the right Ingersoll Rand part or replacement.
Source: Ingersoll Rand, Form P7134, No. 03540176, Edition 2, August 2009. Summary and tables prepared by AirStartersDirect.com, an authorized Ingersoll Rand air starter distributor; the PDF is the authoritative version. Page numbers refer to the PDF file. Reviewed October 2026.
Turbine Air Starter Category Links
Updated turbine starter from Ingersoll Rand for engines from 16-95 liters.
Powerful 70 hp turbine motor offers best-in-class performance in the harshest conditions!
NEWEST MODEL! Unlocks unprecedented productivity for engines ranging from 15 up to 150 liters!
Industrial duty air starter for engines 5 to 60 liters (Diesel). Commonly used in marine, trucking, transit, and oil & gas applications.
Industrial duty air starter for engines 16 to 80 liters (Diesel). Commonly used in mining and marine applications.
For engine displacement of: Diesel 16 to 320 liters Industry applications for the ST700 and ST900 Series starters - oil and gas, marine, power-gen, and transportation.
Industrial duty air starter for engines 5 to 60 liters (Diesel). Commonly used in marine, trucking, transit, and oil & gas applications.
Vane Air Starter, Gas Turbine Starter, and Engine Barring Motor Category Links
NEW! One Size fits engines up to 10+ liters.
For Diesel engines 8 - 32 liters.
Sealed for Gas applications.
For Diesel engines 3 to 20 liters.
For Diesel engines 16 - 320 liters.
For service work on diesel engines.
Questions? Need Help Finding The Right air Starter? Use Our Fast Response Form Below
